AllWinner A33 is the latest processor that is made specially for the low cost tablets running Android operating system. The CPU was launched officially at the Computex 2014 technology event. However since the CPU is going to be so cheap, do not expect cutting edge technology. The Allwinner A33 been manufactured using 28-nanometer process technology and consists of four cores based on ARM Cortex-A7 architecture.
Maximum resolution supported is just 1280×800 pixels which is good enough for budget tablets. Graphics are handled by the dual-core Mali-400MP2.
We have been told that that the Allwinner A33 will be handle video playback at a maximum resolution of Full HD (1920 x 1080 pixels). You will also be able to record them in the same resolution at sixty frames per second. The first tablet equipped with this system-on-chip will be launched in July this year.
Here are AllWinner A33 detailed specifications
CPU
– Quad-core Cortex-A7
– 256KB L1 Cache
– 512KB L2 Cache
GPU
– Mali-400 MP2
– Supports OpenGL ES 2.0 / VG 1.1standards
Video
– Supports 1080p@60fps video playback
– Supports multi-format FHD video decoding, including Mpeg1/2, Mpeg4 SP/ASP GMC and etc
– Supports H.264 High profile 1080p@60fps encoding
– Complies with RTSP, HTTP, HLS, RTMP, MMS streaming media protocols
– Supports OpenMax protocol
Display
– Supports 1/2/4-lane MIPI DSI up to 1280 x 800 resolution
– Supports MIPI DSI V1.01 and MIPI D-PHY V1.00
-Supports command mode and video mode (non-burst mode with sync pulses, non-burst mode with sync event and burst mode)
– Supports RGB/CPU/LVDS LCD up to 1280 x 800 resolution
Camera
– Integrated parallel camera sensor interface
– Supports 5M CMOS sensor
– Supports 8-bit YUV sensor
Memory
– Supports DDR3/DDR3L SDRAM controller, supports two ranks
– Supports 8-bit NAND Flash controller
Audio
– Integrated Hi-Fi audio codec
– Two integrated differential analog mic amplifiers for headset and phone
– Supports Talking Standby Mode for ultra-low power consumption during voice calls
Operating system
– Supports Android 4.4 and above
– Supports Android multi-user function
