Every time you install a tweak or root Grand Prime, you void the warranty of your phone. Many times users brick their phone and the only solution is to flash the stock ROM. By downloading and installing this Samsung Galaxy Grand Prime firmware, you will be back to stock and everything installed and stored on your phone will be deleted as well.
Pre requirements
1. Samsung USB Driver
2.Odin from here http://devfilescloud.com/download/4
3. Stock Firmware (In the search box enter your model then select your region then download)
4. Please make sure that the battery juice is more than 40 percent
Instructions:
1. Download the USB Driver Install in our computer
2. Download the firmware from and extract you will see file tar.md5
3. Power off your grand prime
4. Boot into download mode by pushing volume down + home + power together
5. Press volume up
6. Connect the usb between mobile and computer
7. Extract Odin zip
8. Open Odin.exe
9. When You open you will see yellow color in BOX that means your phone is connected
10. Now Click on PDA and browse to the extract of the firmware and select where pda in file
11. Now Click on CSC and browse to the extract of the firmware and select where csc in file
12. Now click on PHONE and browse to the extract of the firmware and select where modem in file
13. After that click on start button
14. When the process complete unplug your phone
15. When your phone reboot remove your battery
16. Now push Volume up + power + home together to go in recovery
17. Now navigate to wipe data reset by pressing volume up /down
18. Click on wipe data reset by pressing power
19. Again Navigate to reboot system now and click on it
20. Be patient first boot may take time